Trees can be heavier than you might think, and they are taller than you realize when you stand underneath them. This makes it difficult to remove them. You run the risk of injury if you do it wrong. Also, trees that are too close to your house or truck can cause serious damage. These top tree removal tips will keep you and your property safe.
- View the Local Tree Removal Regulations
Before you hire an arborist to start cutting down the tree in your yard, it is important that you check the local guidelines. While some states do not have any requirements for tree removal in north shore, others have strict guidelines, especially for large trees or native species.
Local pros should be familiar with your local guidelines. However, it is still worth checking to determine if any permits are required or rules that apply in your state.
Prices for stump removal
Some arborists include stump removal as part of the tree felling price. If you don’t want the stump to be a part of your garden landscape, you should have it removed by your professional. When getting estimates, be sure to include the cost for tree stump removal.
- Hiring a professional arborist
Hiring an arborist is a good idea if you don’t have the necessary skills and tools. These professionals are equipped with the appropriate safety equipment. They can hold large limbs and cut them away to prevent them from falling on your property.
If the tree you wish to remove is not far from your home, an arborist is the best option. Imagine that you are attempting to cut a maple tree 80 feet high by yourself. The tree is surprisingly heavy at 20,000 pounds and accidentally falls on your home. It would cost a lot more to repair the damage than hiring an arborist to cut the tree.
It can be nerve-wracking to figure out how to remove a tree from your yard. But with professional help, it can be an easy process.
- Find out how tall you are
Although you can technically take down smaller trees, it is best to know where the line is. You should hire a professional if you have to climb a ladder to reach the tree’s limbs.
- Buy a Stump Grinding Service
Whether the stump is left behind by you or someone else, stump grinding can be a great option. This is an efficient and cost-effective option that removes the stump above ground. It also kills the roots. The tree cannot photosynthesize because there is no trunk to grow new foliage.
Tree stump grinding is about $320 depending upon the stump’s dimensions, the difficulty of your job and where you live.
- Make your own cleaning supplies to save money
You can DIY the tree felling if you don’t have the time or the expertise to do it. If you have the skills to operate a chainsaw, you can save money by removing the limbs and trimming the foliage. The arborist will spend less time cleaning up the mess and it will cost you less to haul away the debris.
- Do not use your truck to remove a stump
No matter how tempting you may be, don’t try to remove a tree stump using your truck. Tree stumps can be heavy and you would be pulling against the roots’ grip deep below the ground. Pickups can carry loads between 5,000 to 13,000 but a tree stump of moderate size can easily surpass this limit.
Your truck could be put under a lot of stress by this. You could have the chains break or your truck suffer expensive and significant damage. The stump could also come loose and cause damage to your truck or nearby buildings.
These clever tips will help you get rid of dead trees.
- These are some DIY small tree removal steps
If you have the necessary skills and equipment to remove a small tree, you can do the job safely and effectively. These DIY tree removal tips can help.
Safety Gear
Even if the tree is small, safety gear is vital. You will need:
- Safety goggles to shield your eyes from sawdust
- Protect yourself against falling branches with a logger’s helmet
- Protect your ears from the harsh sound of the chainsaw with earplugs
- Protect your face against flying debris with a facial screen
- Protect your legs with Kevlar chaps.
Water The Day Before You Cut
This allows you to easily dig into the soil to remove root ball and stump. Be sure to thoroughly soak the area and water enough to reach deep into the soil. It makes digging easier and helps loosen the root ball a little. This is also helpful when it comes time to remove trees.
Measure the Girth
The tree trunk’s girth should be measured. You will need to dig 6 inches below the trunk to reach the roots.
Estimate Root Spread
It is not possible to just reach the trunk’s base and remove the stump. Trees have large root systems that reach approximately the same size as the canopy. Before you start cutting, mark the perimeter of the canopy with string, flour, or an environmentally-safe spray paint.
Use Felling Gloves
To stop your ax blade from cutting, use felling wedges. Otherwise you risk being nipped. These little wedges are strong and will ensure that the tree falls in the desired direction.
Tree removal is usually $750, with prices ranging from $200 to $2,000
Leverage the Root Ball
Although removing the root ball can be difficult, using leverage and a wiggling motion to make it easier is a faster and more efficient process. If you are able to remove the root ball from a small tree, you can do so by digging away from it. This will limit damage to the root system, and allows you to transplant the tree to another location.